Optional Interfaces and I/O for routers

Home / Optional Interfaces and I/O for routers

Most Conel routers and modems offer one or more positions for optional interfaces. Thanks to this you may customize the hardware interface according to the relevant application. This modular design lets you change interfaces in the future, or add an interface that is not currently supported. Available standard interfaces:

Ethernet 10/100
  • Basic surge protection
  • Supported devices: all v2 routers except UR5i v2 Libratum, UR5i, XR5i
  • Order code: XC-ETH

Download:

  • Manual for XC-ETH (184 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

RS232
  • Basic surge protection
  • Supported devices: all v2 routers except UR5i v2 Libratum, ER75i, UR5, UR5i, XR5i, CGU04i, CDX800, CDE7
  • Order code: XC-232

Download:

  • Manual for XC-RS232 (370 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

RS485 / RS422
  • RS485 or RS422 – may be selected with switches on the board.
  • Option to use galvanic (electric) separation using switches on the board
  • Basic surge protection
  • Supported devices: all v2 routers except UR5i v2 Libratum, ER75i, UR5, UR5i, XR5i, CGU04i, CDX800, CDE7
  • Order code: XC-485/422

Download:

  • Manual for XC-RS485-422 (222 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

M-BUS master
  • M-Bus master up to 30 M-Bus slave device
  • Permanent protection against bus shortcut
  • Possibility of galvanic separation through the use of external power source
  • Supported devices: all v2 routers except UR5i v2 Libratum, ER75i, UR5, UR5i, XR5i, CGU04i, CDX800, CDE7
  • Order code: XC-M-BUS

Download:

  • Manula for XC-MBUS (158 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

I/O module CNT
  • 4 binary inputs, of which up to 2 inputs may be counter inputs
  • 2 analogue inputs 4-20 mA
  • 1 binary output
  • Supported devices: all v2 routers except UR5i v2 Libratum, ER75i, UR5, UR5i, XR5i, CGU04i, CDX800
  • Order code: XC-CNT

Download:

  • Manual for XC-CNT (301 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

WiFi
  • The expansion port WiFi is created as an addition of router desk, that allows using of wireless interface in Conel v2 routers.
  • WiFi module supports AP (Access Point) function. This module allows you to scan the neighboring networks.
  • Expansion port WiFi supports these standards: 802.11b, 802.11g, 802.11n
  • Expansion port WiFi supports the following types of security: Shared, WPA-PSK, WPA2-PSK
  • Expansion port WiFi supports the following types of authentication: 64/128 WEP, TKIP, AES
  • Wi-Fi module is supplied exclusively to FULL version routers. Installation is carried out in our production department.
  • Supported devices: all v2 routers
  • Order code: XC-WiFi

Download:

  • Manual for XC-WIFI (415 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

 

SDH
  • Expansion port SDH is created as an addition of router desk that allows routers to use a SD card as a USB flash drive or as an internal memory that extands the capacity of the internal memory of your router.
  • Expansion port SDH can be used in all v2 routers with available PORT2. Therefore it is designed for routers in version known as FULL.
  • Supported devices: all v2 routers except UR5i v2 Libratum
  • Order code: XC-SD

Download:

  • Manual for XC-SD (1 959 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

Switch
  • Internal switch (expansion port SWITCH) is created as an addition of router desk.
  • With this device LAN ports of the router act as if this router was a typical switch device.
  • Which means that the router with internal switch desk reads ethernet frames (a data packets on an ethernet link) from any port and transmits them on other ports.
  • Each port on this device can transmit frames independently from every other port.
  • Supported devices: all v2 routers except UR5i v2 Libratum
  • Order code: XC-SW

Download:

  • Manual for XC-SW (1 140 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

We are preparing futher optional modules: Wireless M-Bus …

Expansion port mounting for routers v2

  • Expansion port mounting for routers v2 (646 kB, PDF) * (file is available after login)

* These files are only available to registered users. Login or register.

  • Ethernet 10/100

Order code: XC-ETH

  • RS232

Order code: XC-232

  • RS485 / RS422

Order code: XC-485/422

  • M-Bus master

Order code: XC-M-BUS

  • I/O module CNT

Order code: XC-CNT

  • WiFi

Order code: XC-WiFi

  • SDH

Order code: XC-SD

  • Switch

Order code: XC-SW

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap. Thank you.